BLACK
BODY CERAMIC INFRARED HEATERS |
|
Wattage-Surface
Temperature Chart |
|
|
Catalog
Number |
A-1-1000
|
A-1-650
|
A-1-400
|
A-2-500
|
A-2-325
|
Wattage |
1000
|
650
|
400
|
500
|
325
|
Average
Surface Temperature |
750°C
1380°F
|
630°C
1165°F
|
510°C
950°F
|
750°C
1380°F
|
630°C
1165°F
|
Maximum
Allowable Surface Temperature |
800°C
1470°F
|
700°C
1290°F
|
565°C
1050°F
|
800°C
1470°F
|
700°C
1290°F
|
Peak
Wave Length (µm) |
2.9
|
3.2
|
3.7
|
2.9
|
3.2
|
|
|
|
|
The
maximum efficiency of the Black Body Ceramic Infrared Heater converts
almost every watt of applied energy into radiant energy. Convection
losses are minimal. Sheath temperatures can be controlled and the
process can be zoned with a built-in thermocouple. The wavelength
can be matched to specific absorption characteristics of the material
being heated. Heat losses and changes in process requirements can
also be compensated for. |
|
|
Catalog
Number |
Wattage
|
Voltage
|
X
|
|
A-1-1000 |
1000
|
220/230
|
9-5/8"
|
A-1-1000-4 |
1000
|
480
|
9-5/8"
|
A-1-650 |
650
|
220/230
|
9-5/8"
|
A-1-650-1 |
650
|
120
|
9-5/8"
|
A-1-650-4 |
650
|
480
|
9-5/8"
|
A-1-400 |
400
|
220/230
|
9-5/8"
|
A-2-500 |
500
|
220/230
|
4-3/4"
|
A-2-325 |
325
|
220/230
|
4-3/4"
|
AL-3-200-1* |
200
|
120
|
2-3/8"
|
|
* Flat Profile |
EL
Square Element with Flat Profile |
|
|
|
|
|
Black
Body Ceramic Infrared Heater
with Holes 5/16" (8mm) holes throughout surface is practical for radiant
heating applications with cooling requirements or where a 8-7/8" x
12-1/8" (225mm x 308mm) combination radiant/convective heat source
is needed. Air blown through the surface would provide cooling or
convection heat transfer. 4" ceramic insulated lead wires are provided.
The standard rating is 1500W, 240V, at 14 watts/square inch. |
|
|
|
|
|
|
Important
Notice: By purchasing products from this Site, you acknowledge and
agree that you have read and accept the Terms and Conditions of
this online store. For more information email us at: info@iprocessmart.com
|
|
|
|